Use the sail control
Press R by default to cycle between full, reefed, and furled sails. On touch controls, double-tap your own ship. With a controller, use the sail prompt for your bindings. The official sail-control update also confirms that you can change the binding and set the current sail state in Options.
Stop on the reefed setting
Reefed sails use less wind power than full sails. Use that middle setting when you still need sail power but want a slower approach. The ship shows how much sail is deployed and plays a short sound when you change it.
| Setting | When to use it |
|---|---|
| Full | Take more wind on an open stretch. |
| Reefed | Reduce sail power for closer maneuvering. |
| Furled | Stow the sails. |
Check the sails after casting off
Dropping anchor furls the sails automatically. Raising anchor or leaving port sets them back to full. If you leave straight into a narrow channel, check how much sail is out before assuming your slower setting is still active.
FAQ
What’s the default reefing key?
Use R to cycle the sail states until they’re reefed.
Can I reef from a touchscreen?
Yes. Double-tap your own ship to cycle the sail states.
Are sails still reefed when I leave a port?
Leaving port resets the ship to full sails.